inquiry
Leave Your Message
Products Categories
Featured Products

China Wind Turbine On-grid Converter - Large Power Solutions from Top Suppliers and Factory

The Convertor is a crucial component of wind generator systems, designed to effectively work with both permanent magnet synchronous and asynchronous generators. It transforms the unstable AC output from wind turbines into stable DC, and subsequently back into stable AC, ensuring consistent frequency and voltage control across varying speeds. This process guarantees no impact on the grid while providing superior fault ride-through capability and excellent adaptability. In a typical small wind turbine grid-connected system, essential components include the wind turbine, rectifier, electronic dump load, and grid-connected inverter. Wind energy is initially converted into alternating current with fluctuating amplitude and frequency by the turbine. This alternating current is then transformed into DC by the controller, which is ultimately converted back into a sine wave current of the same frequency and phase by the grid-connected inverter, allowing for seamless integration into the power grid. The grid-connected inverter serves as the heart of the wind turbine grid-connected system. Featuring advanced technology powered by a U.S. TI 32-bit DSP chip and the latest IGBT intelligent power module assembly from Japan, this inverter employs active current-controlled PWM technology. These innovations significantly enhance power supply reliability, protective features, and deliver high power factor sinusoidal current with minimal harmonic pollution. As leading suppliers and a reputable factory in China, we are committed to providing top-tier wind generator components that meet global standards and contribute to sustainable energy solutions.

    Leading Features

    MPPT (Power Curve Tracking) Technology
    Over 97.5% Max. Efficiency
    LCD Touch Screen Display
    RS485, WIFI/GPRS Monitoring App Available (Optional)
    High-Reliability IGBT from Mitsubishi
    Disturbance Detection Technology & Isolated Island Control
    Compact & Light Design for One-Person Easy Installation
    Pure Sine Wave Output (No Pollution & Impact to Grid)
    Dry Contact: Auto Generator Disconnect Protection & Recovery

    Product Parameters

    Model GWI-200KTL GWI-300KTL GWI-400KTL GWI-500KTL GWI-600KTL
    Rated power 200KW 300KW 400KW 500KW 600KW
    Max. AC Output Power 220KW 330KW 440KW 550KW 660 KW
    Circuit method IGBT/PWM (Pulse Width Modulation mode)
    Rated AC Input Power 200KW 300KW 400KW 500KW 600 KW
    Generator Rated Voltage 600-690Vac
    Range Of AC Input Voltage Of Generator 460-750Vac
    Max. Efficiency 97%
    Rated Output Voltage 380 Vac
    Rated Output Frequency 50Hz/60Hz
    Available Grid Voltage Range (Three Phase) 350-450Vac 310Vac-450Vac
    Available Grid Frequency Range 50Hz±1%/ 60Hz±1%
    Total Current Waveform Distortion Rate <3%
    Power Factor ≥0.99
    Power Consumption At Night <100W
    Communication Interface Ethernet network/RS485/RS232
    Electrical Insulation Performance 1500Vac, 1 minute
    Operating Environment Temperature -25~+55℃
    Operating Environment Humidity 0~90%,No condensation
    Protection Input under voltage, over voltage, reverse connection, output over current, short circuit, overheating, etc
    Cooling Method Fan Cooling
    Noise (Horizontal Distance 1 m) <40dB
    Protection Class IP25(indoor)
    Size(mm) 1200*1000*1900 1200*1000*2060 1200*1000*2060 1200*1000*2060 1200*1000*2060
    Model GWI-800KTL GWI-1000KTL GWI-1500KTL GWI-2000KTL GWI-3000KTL
    Rated Power 800KW 1000KW 1500KW 2000KW 3000KW
    Max. Ac Output Power 880KW 1100KW 1650KW 2200KW 3250KW
    Circuit Method IGBT/PWM (Pulse Width Modulation mode)
    Rated Ac Input Power 800KW 1000 KW 1500KW 2000KW 3000KW
    Generator Rated Voltage 600Vac - 690Vac
    Range Of Ac Input Voltage Of Generator 460-750Vac
    Max. Efficiency 97%
    Rated Output Voltage 380 Vac
    Rated Output Frequency 50Hz/ 60Hz
    Available Grid Voltage Range (Three Phase) 310Vac-450Vac
    Available Grid Frequency Range 50Hz±1%/ 60Hz±1%
    Total Current Waveform Distortion Rate <3%
    Power Factor ≥0.99
    Power Consumption At Night <100W
    Communication Interface Ethernet/RS485/RS232
    Electrical Insulation Performance 1500Vac, 1 minute
    Operating Environment Temperature -25~+55℃
    Operating Environment Humidity 0~90%,No condensation
    Protection Input under voltage, over voltage, reverse connection, output over current, short circuit, overheating, etc
    Cooling Method Fan Cooling
    Noise (Horizontal Distance 1 m) <40dB
    Protection Class IP25
    Size (mm) 2000*1000*2060 2000*1000*2060 3000*1000*2060 4000*1000*2060 5000*1000*2060

    System Solution

    System Solution Diagram

    Product Display

    Frequently Asked Questions

    Q What is the maximum efficiency of the GWI series inverters?
    The series delivers a maximum efficiency exceeding 97% to 97.5%, minimizing power conversion loss through advanced MPPT and IGBT PWM switching technology.
    Q What communication methods are supported for remote system monitoring?
    The inverters provide Ethernet, RS485, and RS232 standard interfaces, with optional Wi-Fi and GPRS mobile application monitoring capabilities for real-time operation tracking.
    Q How does the inverter protect itself and connected grid systems?
    It includes comprehensive built-in protections covering input under-voltage, over-voltage, reverse polarity, output over-current, short circuit, over-temperature, and disturbance detection with anti-islanding control.
    Q What is the power consumption when the system is inactive at night?
    Nighttime power consumption is minimal, drawing less than 100W across all models in the series to ensure optimal energy preservation.
    Q What are the standard operating temperature and humidity limits?
    The equipment operates reliably in ambient temperatures ranging from -25°C to +55°C and relative humidity levels from 0% to 90% (non-condensing) using fan cooling.
    Q What function does the dry contact feature serve?
    The dry contact automatically disconnects the connected generator for immediate safety protection when an anomaly occurs and restores connection automatically upon recovery.
    cpbj

    Get in touch

    We're Ready To Assist You Anytime